Warp Live problem

Warper & Mapping related questions

Moderator: Moderator Group

Re: Warp Live problem

Postby Markus Zeppenfeld » Mon Mar 25, 2013 7:46 pm

Hey guys,

maybe I can fill some light into the dark:
The explanation from the manual covers all necessary steps. Basically following this should lead to a working setup:
http://www.coolux.de/root/downloads/sup ... arping.htm

Nevertheless let me add some more words:
- The "target" IP-Adress of the warper has to be the one from the Manager/Master. Within the warping it is the same as sending commands from the Widget Designer. The concept is always, that all information is provided to the Master, which then is distributing the information (including the warping information) to the clients.
This is why the IP and Domain of the warper has to match the settings from your Master device.

- As UV-coordinates and therefore the pixel positions are always normalized to values from 0-1 it is not a pixel-by-pixel relation - let's say this is calculated in percentage (0%-100%). The resolution can be different between the Warper and the Output, while the aspect ratio has to match. Therefor 1920x1080 and 1600x900 is ok, but 1920x1080 and 1920x1200 will lead to wrong settings.

If you have the effect attached, the index object loaded, the output number set within the warper and you have touched a point within the warper it should lead to a moveable, dynamic output. Please notice that the values are only transmitted after the first touch of a point. Otherwise the output will stay black.

Hope this helps.
Markus
Markus Zeppenfeld
Senior Product Manager, Pandoras Box

"Have you tried turning it off and on again?" (from "The IT Crowd" / channel 4)
Markus Zeppenfeld
 
Posts: 824
Joined: Wed Mar 02, 2011 10:12 am
Location: Cologne - Germany

Previous

Return to Warping

Who is online

Users browsing this forum: No registered users and 5 guests

cron