Barco UDX via JSON

Christie Widget Designer Version 6 - Q&A

Moderator: Moderator Group

Forum rules
When asking make sure to include the operating system and the revision of Widget Designer you are using.

Barco UDX via JSON

Postby Sam Kriemelmeyer » Tue Sep 19, 2017 11:41 pm

does anyone have experience with sending commands via the projector node to the Barco UDX series via JSON? what are the appropriate strings for things like shutter and power on/off ?

gracias,
sam
Sam Kriemelmeyer
Theatrical Concepts
samk@theatrical.com
User avatar
Sam Kriemelmeyer
 
Posts: 62
Joined: Wed Aug 20, 2008 6:32 pm
Location: ventura ca / baltimore md

Re: Barco UDX via JSON

Postby liamohanlon » Sun Sep 24, 2017 8:22 pm

These are the commands I used to control some HDX 4k PJs which I believe run the same (next gen) firmware.

LampOn:
Code: Select all
{[LF]"jsonrpc": "2.0", "method": "system.poweron", "params": {}, "id": 12[LF]}[LF]


LampOff:
Code: Select all
{[LF]"jsonrpc": "2.0", "method": "system.poweroff", "params": {}, "id": 12[LF]}[LF]


ShutterOpen:
Code: Select all
{[LF]"jsonrpc": "2.0", "method": "property.set", "params": { "property": "optics.shutter.target", "value": "Open" }, "id": 1[LF]} [LF]


ShutterClose:
Code: Select all
{[LF]"jsonrpc": "2.0", "method": "property.set", "params": { "property": "optics.shutter.target", "value": "Closed" }, "id": 1[LF]} [LF]


Lamp Status:
Code: Select all
{[LF]"jsonrpc": "2.0", "method": "property.get", "params": { "property": "system.state"}, "id": 1[LF]}[LF]


Lamp On Response:
Code: Select all
{"jsonrpc":"2.0","id":1,"result":"on"}


Lamp Off Response:
Code: Select all
{"jsonrpc":"2.0","id":1,"result":"ready"}


Shutter Status:
Code: Select all
{[LF]"jsonrpc": "2.0", "method": "property.get", "params": { "property": "optics.shutter.target"}, "id": 1[LF]}[LF]


Shutter Open Response:
Code: Select all
{"jsonrpc":"2.0","id":1,"result":"Open"}


Shutter Closed Response:
Code: Select all
{"jsonrpc":"2.0","id":1,"result":"Closed"}
liamohanlon
 
Posts: 5
Joined: Thu Aug 20, 2015 10:14 pm
Location: Baltimore, MD

Re: Barco UDX via JSON

Postby Sam Kriemelmeyer » Tue Sep 26, 2017 12:42 am

this is great thank you !

i was able to use these commands to control a UDX Barco Projector from Widget Designer:



UDX TCP:PORT 9090


Set Shutter:
{"jsonrpc":"2.0","method":"property.set","params":{"property":"optics.shutter.target","value":"Open"},"id":12}

Value can be: Open or Closed

Read Shutter Status:
{"jsonrpc":"2.0","method":"property.get","params":{"property":"optics.shutter.target"},"id":12}
Example return for shutter status:
{ "jsonrpc":"2.0", "id":12, "result":"Open" }


Power On:
{"jsonrpc":"2.0","method":"system.poweron","params":{},"id":12}

Power Off:
{"jsonrpc":"2.0","method":"system.poweroff","params":{},"id":12}


Read Power State:
{"jsonrpc":"2.0","method":"property.get","params":{"property":"system.state"},"id":12}

Example return for Power State:
{"jsonrpc":"2.0","id":12,"result":"on"}


couldnt get the shutter read working..... stay tuned...
Sam Kriemelmeyer
Theatrical Concepts
samk@theatrical.com
User avatar
Sam Kriemelmeyer
 
Posts: 62
Joined: Wed Aug 20, 2008 6:32 pm
Location: ventura ca / baltimore md


Return to Widget Designer V6

Who is online

Users browsing this forum: No registered users and 1 guest