Hi Guys,
I was working with a PB quad server recently and i encountered a problems with the live input and wonder if anybody has had the same problems.
i was running my main show from Sequence 1 and my live inputs and some loops from Sequence 2. In total I was using three outputs.
As i had two side screens (outputs 1 & 3) for live inputs, I layer shared the the live input from layer 11 to layer 12. (layers 11 & 12 were dedicated to sequence 2 so it wasn't possible that something on sequence 1 would have caused my issue)
The show ran correctly the day previous but the following day i had signal drop out from the live input on layer 12 the shared layer but no drop out on the original live input layer 11. I know that the problem wasn't caused by an output on PB because I changed to a different look with two PNG in place of the live inputs and there issue went away. Also to grantee that it wasn't an output on PB I swapped Camera positions of 3 & 4 to output 4 and the same issue occurred only on the live input layer 12.
I'm not sure if it was the way that i had programmed the show or maybe the main timeline was using too many resources to allow the live input to be processed correctly? Any suggestions would be welcome!
Cheers,
Noel