Hi Daniel,
Sure its always confusing but with feedbacks i hope it will works always in the future .
Tell me if you're Ok with that :
All GCards setup of NVIDIA Cards depend on the EDID they are receiving from the display.
If a display return an EDID that is a résolution not created somewhere in the boring driver NVIDIA often its buggy and it don't works fine.
You have personnaly expériment our problems with that last week héhé sorry but i think we are on the way of a setup process for each type of displays.
I am begining some test in our sociéty for some different projectors and EDID information sends by theses displays. iam experiencing many difficulties to have all working perfectly.
I will continue this post here in order to give you my feedbacks if you are ok .
First Installation :
Projectors Devices : Two Christies Roadster 18K (Native Matrix 1920*1080)
PB server : One server V4 Pro Connected in DVI on the two Outputs
1 -Before boot the server i have setup the EDID of the two projectors in "1080p / 1080I 50HZ file. ( there is a menu in all Roadster series to setup EDID on the DVI ) And this is the file i have choosed.
2- Have boot the server normally . My first observation was a strange issue ... the digital front panel show a 800*600 Res 60HZ. and when i am looking Res in the list don't show any 1920*1080 ...
3- I decided to try via the Output Menu directly in the Nvidia Setup Driver ... the resolution don't appear ... GRRR so i decided to create it but another time don't working...
4- I have made my modification that works on every Nvidia cards i 'am using (See the file Attach). This file is a modification of the driver just in order to show the old NVIDIA control panel because i know it perfectly.
5- After this point i arrive to create a custom Res but just in 60HZ .. 1920*1080*60HZ
6- So i decided trying using LIghware EDID Manager with the code 44 wich return a 1920*1080@50Hz to the card.
7- Reboot the server in order th card take the new EDID. Finally i have created my f..... Resolution and put it on the two outputs.
8- Changing the good Timing adjust Values according with the tables of Res for Pandora i arrive to have pandora Client Working perfectly .
But the digital panel in front of the server dont show the 1920*1080 Res .
I hope my tests will Helps