Analog Way Ascender 32 / 48 WD Remote Control
Posted: Thu Oct 09, 2014 9:17 pm
I have had some time on my last production an a Analog Way Ascender 32 to Play around with.
The Protocol to control the Ascender can be downloaded from Analog Ways Website after you register
http://www.analogway.com/en/products/sy ... atform/#dl
On the Ascender WebRCA you have to configure the Third Party Protokol:
Port : 10600
In WD you have to create a TCP Connection to that Port.
here is an example Script of how to load Preset 1 into Screen 1
I hope this gives you a good starting point of remote controlling this powerful device.
Daniel
The Protocol to control the Ascender can be downloaded from Analog Ways Website after you register
http://www.analogway.com/en/products/sy ... atform/#dl
On the Ascender WebRCA you have to configure the Third Party Protokol:
Port : 10600
In WD you have to create a TCP Connection to that Port.
here is an example Script of how to load Preset 1 into Screen 1
- Code: Select all
//Set Filter of what to load
TCPSend,1,2047PMcat[LF]
//Set Scale Enable
TCPSend,1,1PMlse[LF]
//Set Destionation Screen #, 0=Screen 1, 1=Screen 2, ...
TCPSend,1,0PMscf[LF]
//Set Origin Memory #, 0=Memory 1, 1=Memory 2, ...
TCPSend,1,0PMmet[LF]
//Set Program/Preview Destination
// 0 = Program, 1 = Preview
TCPSend,1,1PMprf[LF]
//Start the copy, needs to be send last, before TAKE
TCPSend,1,1PMLoa[LF]
//Send TAKE
TCPSend,1,1PMlot[LF]
I hope this gives you a good starting point of remote controlling this powerful device.
Daniel