by Markus Zeppenfeld » Wed Apr 11, 2012 9:18 pm
Hi,
may it be that you touched the points in the wrong order!?
Please refer to the help file topic "Calibration" (12.4.1.2.3):
The calibration buttons enable an intuitive calibration of the Active Region.
[P1], [P2]: [P1] captures the coordinates of the upper left corner (as seen in the Airscan tool). [P2] captures the coordinates of the lower right corner (as seen in the Airscan tool). Both corner orientations refer to the view in the AirScan Tool.
How to do the Auto-Calibration? Interupt the Airscan field at the position of the first corner, press [P1]. You will see the corner’s position (x/y in px) next to the button. Now interrupt the Airscan field at the position of the second corner, press [P2]. When this is done, press [Calc] and the position values will be transferred into the Active Region Settings. Please note: the Safe Region has to be adjusted manually!
All information about calibrating and using the AirScan can be found in the topic "AIRSCAN TOOL SETUP" (12.4.1.2)
Hope this helps
Markus
Markus Zeppenfeld
Senior Product Manager, Pandoras Box
"Have you tried turning it off and on again?" (from "The IT Crowd" / channel 4)