Hi,
I am currently testing the OSC Communication in WD with an android QuickOSC app. I followed the procedure below written by Julia written below:
----------------------------------
Network settings in OSC software:
2. enter the IP of your WD computer
3. enter outgoing and incoming port (these port numbers use in WD, outgoing port OSC = incoming port in WD)
4. make sure that in options of OSC software "Accelerometer" is set to Off.
In WD:
5. create OSC input node
6. enter correct connection ID and press [Apply].
7. move a fader, so that in item properties of the OSC node you see the fader ID under "Incoming OSC Message Header", looks like eg: "/Fader/fader1,f".
8. press the button [take], then the FaderID "Fader/fader1,f" is displayed in the text field after "OSC Filter".
9. now press [Apply] again, then the fader data will be shown for "Float1" (depending which kind of fader you use).
----------------------
UDP Communication is working but the "Floats 1-8 and Int 1-8" does not take any value after applying the OSC Filter ( TAKE, APPLY).
If the fader is moved from QuickOSC app the OSC Message header is updateing but the Float values are not.
Any thought?
- Earl