Barco PDS-902 an WD
Posted: Mon Oct 17, 2016 11:05 am
Controlling a BARCO PDS-902
There are 3 open Port which you can use to controll the PDS-902
Port 23, needs user name and password. (U: user, P: (ohne))
Port 3000: same as 23 but without user name and password
Port 9876: same as 3000
If you do not know the command, just logon via telnet. There is a command called "help" that shows all available commands.
Usefull commands (assuming your connection ID is 1)
Selecting an Input into Preview:
Switching the input into Program
You can check in the TCP Connection with Test for answers.
THE PDS-902 will answer with -e 0 if the command succedded and another error code if it failed.
Please check the manual for more commands.
There are 3 open Port which you can use to controll the PDS-902
Port 23, needs user name and password. (U: user, P: (ohne))
Port 3000: same as 23 but without user name and password
Port 9876: same as 3000
If you do not know the command, just logon via telnet. There is a command called "help" that shows all available commands.
Usefull commands (assuming your connection ID is 1)
Selecting an Input into Preview:
- Code: Select all
TCPSEND,1,ISEL -i5[CR LF]
Switching the input into Program
- Code: Select all
TCPSEND,1,TAKE[CR LF]
You can check in the TCP Connection with Test for answers.
THE PDS-902 will answer with -e 0 if the command succedded and another error code if it failed.
Please check the manual for more commands.