Moderator: Moderator Group
Markus Zeppenfeld wrote:Hi Kim,
this should work with having a serial link device in your timeline, yes. Don't forget to uncheck the "Serial link header" option in the inspector of the device.
as far as I know all Barco Products need to get a carriage return as confirmation, but this should be written in the manual.
Markus
Use this tool to control TCP Devices from the timeline by using text. This tool does not support binary data,
however you can add binary bytes to the result of the tool.
1. Add a Serial Device from the Device Types to your project by Drag&Dropping it to the Devices Tab.
2. Select the Serial Device and edit the configuration in the Inspector Tab
2.1. Uncheck "Use Serial Link Header"
2.2. Set the IP and PORT to the Projector/Device you like to control
2.3. Click "Apply IP and Port"
3. Add a new Key on the timeline in the "Com" row of the serial link device
4. Select the Key and (in the Inspector Tab) check "As Hex"
5. Open the "TextToSerialDeviceHex.exe" tool
5.1. Enter the text you like to send into the text box
5.2. If you are using multiple lines of text please select one of the options:
"Use CR LF" adds a carriage return and a line feed to the end of each line (Windows Style) (DEFAULT)
"Use CR only" / "Use LF only" adds only CR or LF to the line end.
6. Copy the text from the lower box (either using the "Copy to clipboard" button or by selecting and copying the text from the textbox)
7. Paste the text in Pandoras Box -> Inspector Tab for the Key you created in (4)
Return to Widget Designer V4.7
Users browsing this forum: No registered users and 8 guests