Using PB Warper with V3 / V4 Hardware

FAQ's from our coolux support department

Moderator: Moderator Group

Using PB Warper with V3 / V4 Hardware

Postby Julia Foest » Mon Feb 09, 2009 10:51 am

Dear all,

if you want to use one PB Warper per output, please use these graphic card settings depending on your hardware:

V3-server
Open the ATI catalyst control center, right click on the second output, choose "extended mode".
ATI_V3_settings_warper_PB.JPG

Now open the PB Warper, click: File --> secondary output. The Warper now is shown on your second output.
Open the Warper once more and you have one on both outputs.

Before starting Pandoras Box Server you have to go to ATI catalyst control center again, this time choose "stretch main horizontally onto digital panel".

V4-server
You don´t have to change the settings of your NVIDIA graphic card.
Just open the PB Warper, click: File --> secondary output. The Warper now is shown on your second output.
Open the Warper once more and you have one on both outputs.

A Tip for working with two warpers:
By choosing a different mesh colour for one of the warpers, it will be more simple to see if the meshes in the overlapping area exactly fit on each other.

Regards,
Julia
You do not have the required permissions to view the files attached to this post.
User avatar
Julia Foest
 
Posts: 521
Joined: Tue Nov 18, 2008 2:44 pm
Location: Berlin, Germany

Return to FAQ

Who is online

Users browsing this forum: No registered users and 0 guests

cron