Dvi cabling/ distance question

Christie Pandoras Box Version 5

Moderator: Moderator Group

Re: Dvi cabling/ distance question

Postby Markus Zeppenfeld » Thu Mar 29, 2012 10:43 am

Hi again,

we have already made good experiences on Think Logical in many installations as well.

Another product I have recently used for a triple Softedge-active-3D application with pixel-synced outputs is the Photon-X fibre transmitter from PlusMusic:
http://www.photon-x.ch
Here you can set the EDID to transparent or select different pre-installed EDIDs as well.

Markus
Markus Zeppenfeld
Product Manager, Pandoras Box

"Have you tried turning it off and on again?" (from "The IT Crowd" / channel 4)
User avatar
Markus Zeppenfeld
 
Posts: 818
Joined: Wed Mar 02, 2011 10:12 am
Location: Cologne - Germany

Re: Dvi cabling/ distance question

Postby precision » Wed Jun 06, 2012 12:20 pm

fiber optic products
all of fiber optic cable are fast and reliable but i suggested to use cat from 100 which gives You good result.
precision
 
Posts: 1
Joined: Wed Jun 06, 2012 12:15 pm

Re: Dvi cabling/ distance question

Postby ambroseangle » Thu Aug 23, 2012 1:06 pm

The Dvi cables are designed to carry digital-only signals from a graphics card to a display. If we have the requirement of interfacing two digital only devices, then we should use a DVI-D cable. The cables are configured for single or dual link operation, and use super high resolution(24 gauge wire)cables, while most consumer-grade DVI cables use smaller, 28 guage wire. The limits consumer-grade cables to lower resolutions and distances of less than 5 meters. The maximum recommended resolution is listed with each cable length, however all cable lengths support up to o 1920x1200 resolution at 60Hz with the usage of the DVI repeater.



hdmi cables
ambroseangle
 
Posts: 1
Joined: Thu Aug 23, 2012 12:46 pm

Re: Dvi cabling/ distance question

Postby Christopher Fluegel » Thu Aug 23, 2012 4:13 pm

I also can say that my experiences with products from "spatz" (http://www.spatz-tech.com) were always good!
i have driven a 1080p60 signal through a 50m (164ft) dvi cable.
also their fibre products are very good and affordable! never had edid problems with spatz products!
Christopher Fluegel
Technical Support, coolux GmbH
Christopher Fluegel
 
Posts: 112
Joined: Mon Feb 23, 2009 1:03 am
Location: Cologne, Germany

Re: Dvi cabling/ distance question

Postby metalroot » Thu Aug 23, 2012 4:29 pm

Hi everybody

The fiber extender PhotonX, which was mentioned by Markus, has an integrated EDID manager. Therewith it is possible to either let EDID pass through, or to emulate several EDID presets, or to even save EDID data from a screen and emulate this saved EDID.

For more information visit http://www.photon-x.ch.

Greets

Roman
>plusmusic.ch
metalroot
 
Posts: 2
Joined: Thu Apr 09, 2009 8:51 pm
Location: Zürich

Previous

Return to Pandoras Box V5

Who is online

Users browsing this forum: No registered users and 9 guests

cron