Hey Guys,
after a while of searching and trying and reading Manuals and Manuals, here is a good way to Control
a Nevion 8x8 HD SDI Matrix by Widget Designer.
Protocol : Change to Telnet ( Nevion Configurator - Default is NCB - RS232 )
IP : Custom (Tool for advising is Nevion Configurator)
Port : 4381 (Default Port)
Open CMD Line in Windows and Type:
telnet 2.0.0.99 4381
Next:
x l2 4 1 (Double Enter)
Setup in Widget Designer (tested in rev. 489)
Create Connection Manager :
TCP Connection:
Client Only
Name...
IP 2.0.0.99
Port 4381
Test & Start
Custom Script:
TCPSend,x l2 4 1 [CR LF][CR LF]
x = Crosscommand
l2 = Dipswitch Channel of your Device (on the Back of your Device)
4 = Input 5
1 = Output 2
This is the way to control every Nevion HD SDI Matrix by Widget Designer.
Best regards
Benjamin Brostian